- CORPORATE HEADQUARTERS
- 9953 Broadway · P.O. Box 409 · Irwin, PA 15642
- Phone: 724-864-8900 · Fax: 724-864-8909
Mine and Tunneling Supply
Miniveyor: The Powerful Portable Conveyor System
The Miniveyor family of portable conveyor systems represents one of the most powerful & flexible solutions for the rapid deployment of a temporary conveyor system. The narrow Miniveyor units while portable can move 25-SO tons/hour. Only 7" high and capable of operating lying on the ground, it's meant to excavate below grade, through windows or in other restricted areas. By operating 6 from a single 20 amp circuit you won't search for power at the job site. With an aircraft grade aluminum frame and a solid stainless steel slider bed the Miniveyor family is built to last. These are the only units in their class that have reversible belts and foam filled cores to add strength while saving weight. Truly there is nothing like the Miniveyor System.
"In field trials and in daily use, one man using a Miniveyor proved to be faster than 4 men with a wheelbarrow"
Powerful
Miniveyors while small and lightweight are very powerful. Standard conveyors are large and bulky, with motors and reducers mounted outside the frame. The Miniveyor uses powerful 370 and 550 watt motors mounted inside the end rollers and specifically designed and manufactured for the application. Turning the belts at 80 and 100 ft/min respectively, the Miniveyor is the fastest conveyor system in its class. It can also operate at inclinations up to 40°
Portable
Manufactured in 10 ft lengths and weighing only 160 lbs they can be carried into position and set up in minutes. A foam filled core sandwiched between stainless steel plates means they are structurally strong while light and durable. The units stack and lock for easy transport. All accessories such as hoppers and side rails are also constructed from weight saving aluminum.
Modular
Modular construction lends itself to a customer designed installation. Units can be locked together using a clamp kit and 6 modules can provide a 60 ft span. Use the 20ft Kit and 2 units become 20' long. There are hoppers for hand loading run grizzly style hoppers for machine loading. For greater tonnage, n units in tandem with a double wide hopper. If moving over sized materials utilize side rails to reduce spillage. Optional wheels are also available.
Rugged
Miniveyors are built for a tough and demanding environment. The belt cleats are attached using high frequency welding to ensure long life. Miniveyors are corrosion free with an all aluminum and stainless steel construction and the drive motors are sealed to 1E65 standards. The impact resistant control box is waterproof and the motors are protected by a thermal overload circuit to guard against damage. They couldn't be built any tougher!
Safety
Miniveyors are often used in rental environments were operators are not familiar with conveyors, so every part of the system has been designed with safety in mind.
The control box circuit is 24 AC and it is GFI rated to prevent electrical problems. The drive mechanism is contained within the frame offering no pinch points and the belt edges are protected under guard. Rails and hoppers all have safety pins and chains to ensure a secure assembly.
Versatile
Up a flight of stairs and turn 90°, no problem. Run on a 40° slope into a hopper or 200 ft across a roof top. In all these applications Miniveyor was the solution to difficult excavation or conveying problems. Miniveyors have been mounted on mobile equipment and made permanent conveyors in batch plants. As scavenger conveyors in confined areas in coal mines or in difficult landscaping environments. The belts even reverse, just by switching plugs.
| Miniveyor | ||
|---|---|---|
| 3M40PI (smooth) | ||
| 3M40CI (cleated) | ||
| Conveyor | ||
| Length | 10 Feet | |
| Width | 15 Inches | |
| Depth | 7.5 Inches | |
| Weight | 160 lbs | |
| Construction | Stainless/Aluminum | |
| Speed 110V | 80 feet/min | |
| Nominal Load | 250 lbs | |
| Maximum Angle* | 40° | |
| *Load & Condition Dependant | ||
| Belt | ||
| Material | Reinforced PVC | |
| Width | 12 Inches | |
| Thickness | 0.125 Inches | |
| Fastener | Stainless Wire Hook | |
| Optional Styles | MSHA & Food Grade | |
| Standard Cleats | 0.75" on 12" Center | |
| Electrical | ||
| Motor Type | Electric/Hydraulic | |
| Voltage | 110 v Single Phase | |
| Output Power 110V | 370 watts | |
| Thermal Protection | Thermal Circuit | |
| Compliance | CE Standards & UL | |
| Motor Protection | Enclosed to IP65 | |
| Control Box | ||
| Units/Control Box | 6 Conveyors | |
| Control System | ||
| Safety System | Monitored Loop | |
| Control Voltage | 24 volt ac | |
| Emergency Stop | Box & System | |
To learn more, contact Irwin Mine and Tunneling Supply.
